Ddating agency direct 330 txt 330
Dial-In and Dial-Out may be configured on the same line.Baler14 Improvements - In addition to the new dialout capability, major improvements have been made and tested over a period of several months to simplify Q330-Baler interaction, and to simplify Baler address management during data retrieval operations.
Upon receipt of the message informing the listener of the Q330’s IP address assigned by the ISP for the duration of the PPP connection, the listener may direct any application that would normally be used in conjunction with a Q330, including data acquisition, configuration-port maintenance, software reload, etc.The cellular modem may dialout episodically as in the normal operation of a POTS mode, or may be configured to maintain an active connection, allowing a remote client to access the Q330 at any time.POC messages may also be configured to signal establishment of the link, and to maintain an active client database of available remotes.Typical applications of dialout might include regular transmission of status information from a remote Q330 operating primarily in a "stand-alone" recording configuration with a local Baler.Another application provides a "dial backup" capability to acquire continuous data from a remote Q330 where a primary internet or satellite-based telemetry system may have failed.This release package is strongly recommended for all users.
Note that all configuration and firmware is interoperable between the Q330, Q330HR, Q330S, & Q330S , except as noted in the table below. General Notes 2009-12-29 Release Package Overview - The 20091229 package is the release package culminating an extensive series of Beta releases and field tests to enhance operation, improve flexibility, and support the Q330S.
General Notes 2009-07-31 Release Package Overview - The 20090731 package is the release package culminating an extensive series of Beta releases and field tests to enhance operation, improve flexibility, and support the Q330S.
General Notes 2008-04-28 Release Package Overview - The 20080428 package is the release package culminating an extensive series of Beta releases and field tests to enhance operation and improve flexibility.
Dialin - Dial-In capability using a POTS modem permits a remote client dialer application to call and establish a PPP link to the Q330 for maintenance and backup purposes, or to acquire data on demand.
A standard "dial-up networking" client, such as a W2K or WXP dialer is compatible with the Q330’s dial-in function. The dial-in capability provides a reliable backup means of communication with and maintenance of the Q330.
The new dialout functionality permits the Q330 to automatically dial a pre-determined telephone number and establish a PPP or SLIP link upon reaching one of several activation criteria, analogous to the criteria for local Baler activation: packet buffer full, elapse of a time interval, completion of a scheduled acquisition time window.